A thru F | Vehicles
G thru L | Vehicles
M thru P | Vehicles
S thru V
Toyota Matrix 2009-2011
Hope you enjoy this slide
show for a Toyota Matrix front windshield replacement.
The OEM glass that was originally installed on this
car was AGC Automotive with the DOT 376 made in the
USA. We were able to install the same brand auto glass
back into the Matrix but without the Toyota name imprinted
on the windshield.
Read more below show.
When we replace this
windshield the cowl and wipers were removed prior to
cutting out the windshield. We used a paint protector
cold knife blade to protect the outer walls from being
scratch during removal. Once removed the pinchweld was
cleaned from dirt and the old seal trimmed down to 1-2
mm thin. Next we cleaned the area again and primed the
pinchweld to help prevent future rust from forming.
While the primer is drying the windshield is prep for
installation by cleaning, transfer all sticker and installing
two suction for a two person installation. The sealant
used on this installation was Adco Titan Pro 1 with
a 1 hour safe drive-away time. Hope you enjoyed this
slide show and please fell free to see our other slide
shows on this site. If you have any question please
call or E-mail us.